High Transparency, Non Yellowing, Crystal-like
Non-wipe Clear Gel
High Gloss and Outstanding Transparency
Made In Japan with X-POLYMER α formula
*Parts made with NICHIBI's Non Wipe Clear Gel*
We made various Non-Wipe gels
into cubes with silicone molds for
yellowing and transparency test!
K's Non-Wipe Product
Since the intensity of yellowing is deceived by blue coloring, the blueness is considerably strong even in the state before curing. There is a bluish tint that discolors when applied to a white color. After curing, it is turbid and has no transparency. The curing heat is also a little high, and it can only be used with a thin coat.
C's Non-Wipe Product
Before curing, it has a very strong yellowish and bluish tint, and after curing it turns even darker. There is no transparency and it is cloudy.
Nichibi's Non Wipe Clear Gel
Polyurethane itself is transparent and clear without yellowing or reddish color. There is almost no yellowing after curing, and even with a thickness of about 2 mm, no unpleasantly high curing heat is felt.
By blending X-POLYMER α, a pure, transparent, non-wipe polyurethane with no yellowing or reddish tints, it is possible to achieve container-type Non-Wipe Gels with a high viscosity, non-heat curing with low curing heat, and non-yellowing, and also achieving outstanding gloss with no wiping, which all these were difficult to achieve in the past. It combines the convenience of a non-wipe finish with outstanding shine. We offer OEM production of unparalleled high-grade non-wipe clear gels made with practicality in mind that can be used in salon services.
Non-Wipe Clear α Series
Non-Wipe Clear α Series
A wide range of viscosities and hardnesses, from convenient brush-on types to container types with higher viscosity. This is a non-wipe clear gel that achieves non-heat, non-yellow and non-crowding properties and is ideal for those who have only been able to use thin coats in the past or have been afraid to use it on customers because of the curing heat.
Non-Wipe Clear Gel with increased viscosity for transparency without redness or yellowing. It's ideal for Topcoat when remover-off is desired with S to M size floaters.
We managed to acchieve high transparency without yellowing. Soft type with excellent solubility in a remover and can be easily removed as if it were floating away.
Even those with long free edges will feel a stable hold with outstanding strength. The high intensity, glossy and luxurious sheen that only Semi-Hard Gel can provide is recommended as a top coating for M - L size.
An enchanting wet sheen is achieved without yellowing and without heat. With its light and easy-to-use viscosity, it can be used not only as a top coat for shine, but also as a coating for nail tips, etc., to achieve a high-brightness gloss with an unprecedented shine.
With out Non-Wipe Gel, it strongly holds stones and parts in place . The gel does not string, and the brush is specially processed to cut the gel in a sharp, so the gel stays on the target and anyone can fix and amend the parts easily . It has a very strong clear feel compared to other products that are said to have good brushing experience.
Strongly fixes parts and accessories with outstanding adhesive strength. Pursues a pure, clear feel that does not spoil the transparency of stones and other accessory. No troublesome gel wiping step is required and it does not fog up parts.
OEM Production of products tailored to customer requirements, such as adjusting viscosity and texture, is possible at your will.
A series of ground-breaking products are being developed, including a next-generation Non-Wipe Gel system based on the newly developed ' X-POLYMER α' polyurethane-based Non-Wipe Gel technology.